Linking to A Wi-fi System With XCTU

Open XCTU. It must open on the „PC options“ loss. On there, select your XBee Explorer’s COM slot and make sure the port setup are because below (9600 8-N-1). 1st, setup the COM port and make sure the options include proper.

Struck Test/Query to ensure that you can talk to their XBee WiFi. You need to get a response like: this is an excellent indication! Means we’re chatting with the XBee.

Mouse click to the „Modem setup“ loss. And click „Look Over“ to produce your own XBee Wi-fi’s stored setup. A view associated with the XBee Wi-fi’s standard parameters.

Pick „energetic Scan“ around the the top of scrolling windows. Next click the „Scan“ button** that seems. This may opened the network skim electric.

Click on the „Scan“ key towards the bottom of scan window. If all goes better, their network should come above. The „connect Margin“ benefits symbolizes the strength of the sign (bigger is better). Plus the „safety“ worth indicates the security means for the circle. Choose the system’s SSID, submit a passkey if required, and click „Select AP“.

Identify their system. In case it is encrypted, enter your own safety Key. Subsequently click „pick AP“ (maybe not „accomplished“!). XCTU will configure your own XBee, and it surely will try lease a DHCP target if your community is established because of it.

After effectively connecting, click „Review“ towards the top eharmony vs zoosk of the screen once again. This will update all the XBee’s configurations, including GW (the gateway IP), MK (the subnet mask), and the (the component’s assigned IP). If these principles all make sense, next congratulations, your XBee are connected to your Wi-fi circle! Our XBee Wi-fi module’s ip is 192.168.0.101.

Yay! What today? There are some directions it is possible to get:

Communicating with More XBees

If you have ever put XBees prior to, you most likely think about them as easy-to-setup wireless transceivers.Continue reading→