Step by step instructions for gluing inner corners
When finishing, the most important problem can be uneven walls and the consequent folds on the wallpaper. It’s also necessary to take into consideration that if the walls are crookedthe joints of background canvases can invisibly.
After gluing the last one in the front of the inner corner of the cloth should measure the remaining distance. gidpola.ru It’s measured from the edge of the glued cloth to the adjacent wall, so the resulting figure is added 10-15 millimeters. If the walls are very curved, then the extra figure could be more.
Cut a strip equivalent to the resulting figure, taking into account the allowance. The surfaces are treated with glue. Based on the kind of coating it may be precisely the wall or surfaces.
The strip is glued independently using the cut side to the wallsocket. The background should go on the opposite plane.
If the glued background is wrinkled, you will need to make a few little cuts perpendicular to the folds.
Level or incline on the adjacent wall is a vertical line. The distance from the corner is equivalent to the diameter of the previous cut strip, never including additions.
The surfaces are smeared with glue, and the coating is glued to the wall with the flat side to the line. The cut side goes onto the adjoining wall.
How to paste the outer corner (outer corner)?
Protruding corner ought to be pasted by analogy with the inner, but there are small differences, which also have to be taken into account when working.
Measured the space remaining from the glued background to the adjacent wall. Insert 20-25 millimeters to the captured figure.
A section is cut away, taking into account the added 20-25 millimeters.
Prior to gluing, the surfaces are treated with glue.
The even edge must be glued to the wallpaper fixed onto the walls, the own cut side“goes“ into the next plane. If necessary, small cuts are created in the area of visiting another wallpaper, smoothed and pressed into the wallsocket.
Draw a vertical strip on the adjoining wall at a distance of only glued cut strip and 6-10 millimeters.
After applying the adhesive, the strip is placed on the wall with its flat side towards the marked line, moving over the border of the already glued strip.
The joints have been smeared with glue and ironed with a rollercoaster. After that, the top layer is trimmed along the ruler and the two layers are combined together.